Reach M2 GNSS Antenna Kit
Package Includes:
- 1x Emlid Reach M2
- 1x Charging Cable USB-A to Micro-USB
- 1x JST-GH 6-pin to Jumper Pin Cable
- 1x JST-GH 5-pin to Jumper Pin Cable
- 1x Multi-Band GNSS Antenna for Reach M2
- 1x Cable 0.5m with SMA Connector for Reach M2
Emlid Reach M2 Specifications
Mechanical |
|
|
Dimensions |
56.4 x 45.3 x 14.6 mm |
|
Weight |
35 g |
|
Operating tº |
-20…+65 ºC |
Electrical |
|
|
Input voltage on USB and JST GH |
4.75 - 5.5 V |
|
Antenna DC bias |
3.3 V |
|
Avg. consumption @5V |
200 mA |
Positioning |
|
|
Static horizontal |
4 mm + 0.5 ppm |
|
Static vertical |
8 mm + 1 ppm |
|
Kinematic horizontal |
7 mm + 1 ppm |
|
Kinematic vertical |
14 mm + 1 ppm |
Connectivity |
|
|
LoRa radio (sold separately) |
|
|
Frequency range |
868/915 MHz |
|
Distance |
Up to 8 km |
|
Wi-Fi |
802.11b/g/n |
|
Bluetooth |
4.0/2.1 EDR |
|
Ports |
USB, UART, Event |
Data |
|
|
Corrections |
NTRIP, VRS, RTCM3 |
|
Position output |
NMEA, LLH/XYZ |
|
Data logging |
RINEX with events |
|
Internal storage |
16 GB |
GNSS |
|
|
Signal tracked |
GPS/QZSS L1C/A, L2C |
|
Number of channels |
184 |
|
Update rates |
10 Hz GNSS |
|
IMU |
9DOF |
Emlid Reach RS2+Multi-band RTK GNSS receiver with centimeter precision for surveying, mapping and navigation. Comes with a mobile app.
Multi-Band GNSS Antenna for Reach M2Multi-band helical GNSS Antenna. Tracks L1/L2 bands on GPS, GLONASS, BeiDou and E1/E5 on Galileo.
LoRa Radio for Reach M2/M+Allows Emlid Reach M2/M+ to receive corrections from Emlid Reach RS2/RS+.
Camera Hot Shoe Adapter for Reach M2/M+Wires the flash sync pulse from camera to Reach module for precise time stamping of each picture. Designed to work with any camera with hot shoe connector, tested to work with Sony, Canon, and Nikon. Necessary for PPK workflow.
Extension Cable 2m for Antenna M2/M+Cable of 2 meters length with an MCX female connector on one side and an MCX male connector on the other side to connect to an Emlid Reach M2 or Emlid Reach M+ module.
Cable 0.5m with SMA Connector for Reach M2/M+Cable of 0.5 meters length with an SMA connector on one side and an MCX connector on the other side to connect to an Emlid Reach M2 or Emlid Reach M+ module.
Cable 2m with TNC Connector for Reach M2/M+Cable of 2 meters length with a TNC connector on one side and an MCX connector on the other side to connect to an Emlid Reach M2 or Emlid Reach M+ module.
Cable JST-GH 6p-6p for Pixhawk 2/Reach M2/M+ IntegrationCable to connect Pixhawk 2 to an Emlid Reach M+ or Emlid Reach M2 module.
Cable JST-GH to DF13 6p-6p for Pixhawk 1/Reach M2/M+ IntegrationCable to connect Pixhawk 1 to an Emlid Reach M+ or Emlid Reach M2 module.
